In this article we show you how to create your own sounds and provide you with a few fun presets to get your started.
How to Create Effects
Coming up with new effects is actually quite easy. It’s a process of trial and error and that most important thing in all music production: Listening. It sounds obvious, but you would be surprised how many people forget the importance of listening – really listening closely to the output and hearing how subtle adjustments effect the sound. It’s a skill you have to practise. The best way to listen carefully enough to the output of any music program is through good quality headphones. Closed cup headphones are best but any you have should be fine as long as they are good quality. Sony and Philips are makers of headphones that are both good and cheap. Zero out the controls of the effect by selecting “Reset to default” from the drop-down menu, then carefully adjust a control and hear the effect. Do A/B listening to make sure that you know what is actually different; you do this by clicking bypass or turning off the effect by unticking the checkbox next to it and comparing the two sounds. Obviously knowing how an effect works a little bit before you start tinkering helps. For example, Chorus effects work by playing the original signal off against a slightly out-of-phase copy of the same sound, so listening to Dry and Wet on their own may sound exactly the same. Also, with echo or delay, the Dry and Wet channels sound the same, so the effect is all about mixing them. But the wet channel of a reverb effect on its own is a good effect and different even though it’s meant to be mixed with the dry. That might be something you can bear in mind and use creatively. Play around and see what you can come up with. Here’s a few to get you started.
Ugly Machine
This effect is based on the VST:ReaVerb by Cockos. It sounds good on drum machines. Click the FX button on the track you wish to effect, and Add VTS:ReaVerb.
First set the Wet slider to “+0.1” and the Dry slider all the way down to “-Inf.” Click the Add button and add an “Echo Generator” and a “Reverb Generator.” Click on the Echo Generator and adjust the settings like so: Now click on the Reverb Generator and adjust these settings:
Drumbox Plodder
This effect is based on the VST:ReaPitch by Cockos. This sounds especially good on drum machines. (Add a little VST:ReaDelay and choose the “stock – large room” preset for a little extra retro punch.) Click the FX button on the track you wish to effect and Add VST:ReaPitch. Leave the wet and dry sliders where they are, +0.0 wet and -inf dry.
Basic Demon
This effect is based on the VST:ReaPitch by Cockos. This is the basic demonic sound effect, a combination high voice and low voice which of course works best on voice samples but also helps to fatten percussive sounds. It sounds awful on sung or melodic instruments due to the clashes of pitches. Click the FX button on the track you wish to effect and Add VST:ReaPitch.
Leave wet and dry as they are: wet fader up at +0.0 and dry down to -inf. Adjust the following sliders: Leave everything else the way it is. Now click the Add Shifter button to add another pitch. On the 2 tab adjust the following sliders: If you have any nice Reaper presets you’d like to share, please let us know in the comments below.
